Home › Flexible › TPU 85A

TPU 85A print settings

TPU 85A is a softer, stretchier grade that only prints well on direct-drive extruders. Recommended baseline: 230°C hotend, 45°C bed, 30% part-cooling fan. Pick your printer below for a tuned profile.

⚡ Quick answer: TPU 85A prints best around 230°C hotend and 45°C bed. Very soft (85A shore) — direct drive only and print very slowly.

TPU 85A settings by printer

Printer	Hotend	Bed	Speed	Fit
Anycubic Kobra S1	230°C	45°C	38 mm/s	✅
Anycubic Kobra 2	230°C	45°C	21 mm/s	✅
Anycubic Kobra 2 Pro	230°C	45°C	30 mm/s	✅
Bambu Lab A1	230°C	45°C	38 mm/s	✅
Bambu Lab A1 mini	230°C	45°C	38 mm/s	✅
Bambu Lab H2D	230°C	45°C	50 mm/s	✅
Bambu Lab P1P	230°C	45°C	45 mm/s	✅
Bambu Lab P1S	230°C	45°C	45 mm/s	✅
Bambu Lab X1 Carbon	230°C	45°C	50 mm/s	✅
Elegoo Centauri Carbon	230°C	45°C	45 mm/s	✅
Creality K1	230°C	45°C	45 mm/s	✅
Creality K1 Max	230°C	45°C	45 mm/s	✅
Creality K1C	230°C	45°C	45 mm/s	✅
Creality Ender 3	230°C	45°C	20 mm/s	⚠️
Creality Ender 3 Pro	230°C	45°C	20 mm/s	⚠️
Creality Ender 3 S1	230°C	45°C	20 mm/s	✅
Creality Ender 3 S1 Pro	230°C	45°C	23 mm/s	✅
Creality Ender 3 V2	230°C	45°C	20 mm/s	⚠️
Creality Ender 3 V3	230°C	45°C	30 mm/s	✅
Creality Ender 3 V3 KE	230°C	45°C	30 mm/s	✅
Creality Ender 3 V3 SE	230°C	45°C	23 mm/s	✅
Creality Ender 5 S1	230°C	45°C	30 mm/s	✅
Flashforge Adventurer 5M	230°C	45°C	38 mm/s	✅
Elegoo Neptune 4	230°C	45°C	30 mm/s	✅
Elegoo Neptune 4 Max	230°C	45°C	30 mm/s	✅
Elegoo Neptune 4 Pro	230°C	45°C	30 mm/s	✅
Prusa MINI+	230°C	45°C	25 mm/s	⚠️
Prusa MK3S+	230°C	45°C	25 mm/s	✅
Prusa MK4	230°C	45°C	35 mm/s	✅
Prusa MK4S	230°C	45°C	43 mm/s	✅
QIDI X-Plus 3	230°C	45°C	45 mm/s	✅
Sovol SV06	230°C	45°C	23 mm/s	✅
Sovol SV07	230°C	45°C	38 mm/s	✅
Voron 2.4	230°C	45°C	50 mm/s	✅

Sources & how we tuned this

These settings are community-tested starting points, cross-checked against manufacturer guidance and trusted material references:

Last verified: 2026-07-17. Always run a temperature tower and a small calibration print for your exact spool.