Home › Easy / Everyday › PVB

PVB print settings

PVB can be vapor-smoothed with IPA for a glossy, injection-molded look. Recommended baseline: 215°C hotend, 70°C bed, 60% part-cooling fan. Pick your printer below for a tuned profile.

⚡ Quick answer: PVB prints best around 215°C hotend and 70°C bed. Lower part-cooling improves layer bonding on PVB.

PVB settings by printer

Printer	Hotend	Bed	Speed	Fit
Anycubic Kobra S1	215°C	70°C	128 mm/s	✅
Anycubic Kobra 2	215°C	70°C	71 mm/s	✅
Anycubic Kobra 2 Pro	215°C	70°C	102 mm/s	✅
Bambu Lab A1	215°C	70°C	128 mm/s	✅
Bambu Lab A1 mini	215°C	70°C	128 mm/s	✅
Bambu Lab H2D	215°C	70°C	170 mm/s	✅
Bambu Lab P1P	215°C	70°C	153 mm/s	✅
Bambu Lab P1S	215°C	70°C	153 mm/s	✅
Bambu Lab X1 Carbon	215°C	70°C	170 mm/s	✅
Elegoo Centauri Carbon	215°C	70°C	153 mm/s	✅
Creality K1	215°C	70°C	153 mm/s	✅
Creality K1 Max	215°C	70°C	153 mm/s	✅
Creality K1C	215°C	70°C	153 mm/s	✅
Creality Ender 3	215°C	70°C	43 mm/s	✅
Creality Ender 3 Pro	215°C	70°C	43 mm/s	✅
Creality Ender 3 S1	215°C	70°C	68 mm/s	✅
Creality Ender 3 S1 Pro	215°C	70°C	77 mm/s	✅
Creality Ender 3 V2	215°C	70°C	51 mm/s	✅
Creality Ender 3 V3	215°C	70°C	102 mm/s	✅
Creality Ender 3 V3 KE	215°C	70°C	102 mm/s	✅
Creality Ender 3 V3 SE	215°C	70°C	77 mm/s	✅
Creality Ender 5 S1	215°C	70°C	102 mm/s	✅
Flashforge Adventurer 5M	215°C	70°C	128 mm/s	✅
Elegoo Neptune 4	215°C	70°C	102 mm/s	✅
Elegoo Neptune 4 Max	215°C	70°C	102 mm/s	✅
Elegoo Neptune 4 Pro	215°C	70°C	102 mm/s	✅
Prusa MINI+	215°C	70°C	85 mm/s	✅
Prusa MK3S+	215°C	70°C	85 mm/s	✅
Prusa MK4	215°C	70°C	119 mm/s	✅
Prusa MK4S	215°C	70°C	145 mm/s	✅
QIDI X-Plus 3	215°C	70°C	153 mm/s	✅
Sovol SV06	215°C	70°C	77 mm/s	✅
Sovol SV07	215°C	70°C	128 mm/s	✅
Voron 2.4	215°C	70°C	170 mm/s	✅

Sources & how we tuned this

These settings are community-tested starting points, cross-checked against manufacturer guidance and trusted material references:

Last verified: 2026-07-17. Always run a temperature tower and a small calibration print for your exact spool.