Home › Easy / Everyday › Wood PLA
Wood PLA print settings
Wood PLA contains real wood fibres, so a 0.5 mm or hardened nozzle reduces clogging. A good universal starting point is 200°C hotend, 55°C bed and 45 mm/s, but the exact numbers depend on your printer — pick yours below.
190–215°C
Hotend range
55°C
Bed
Beginner
Difficulty
Wood PLA settings by printer
| Printer | Hotend | Bed | Speed | Retr. |
|---|---|---|---|---|
| Creality Ender 3 V3 SE | 200°C | 55°C | 45 mm/s | 0.8 mm |
| Creality Ender 3 V2 | 200°C | 55°C | 45 mm/s | 5 mm |
| Creality Ender 3 S1 Pro | 200°C | 55°C | 45 mm/s | 0.8 mm |
| Bambu Lab A1 | 200°C | 55°C | 63 mm/s | 0.8 mm |
| Bambu Lab A1 mini | 200°C | 55°C | 63 mm/s | 0.8 mm |
| Bambu Lab P1P | 200°C | 55°C | 63 mm/s | 0.8 mm |
| Bambu Lab P1S | 200°C | 55°C | 63 mm/s | 0.8 mm |
| Bambu Lab X1 Carbon | 200°C | 55°C | 63 mm/s | 0.8 mm |
| Prusa MK4 | 200°C | 55°C | 63 mm/s | 0.8 mm |
| Prusa MINI+ | 200°C | 55°C | 45 mm/s | 5 mm |
| Anycubic Kobra 2 | 200°C | 55°C | 63 mm/s | 0.8 mm |
| Sovol SV06 | 200°C | 55°C | 45 mm/s | 0.8 mm |
| Creality K1 | 200°C | 55°C | 63 mm/s | 0.8 mm |
| Creality K1 Max | 200°C | 55°C | 63 mm/s | 0.8 mm |
| Elegoo Neptune 4 | 200°C | 55°C | 63 mm/s | 0.8 mm |
| Voron 2.4 | 200°C | 55°C | 63 mm/s | 0.8 mm |