Home › Easy / Everyday › Matte PLA

Matte PLA print settings

Matte PLA hides layer lines with a chalky finish and prints just like standard PLA. Recommended baseline: 210°C hotend, 60°C bed, 100% part-cooling fan. Pick your printer below for a tuned profile.

⚡ Quick answer: Matte PLA prints best around 210°C hotend and 60°C bed. It is a beginner-level filament.

Matte PLA settings by printer

Printer	Hotend	Bed	Speed	Fit
Anycubic Kobra S1	210°C	60°C	143 mm/s	✅
Anycubic Kobra 2	210°C	60°C	80 mm/s	✅
Anycubic Kobra 2 Pro	210°C	60°C	114 mm/s	✅
Bambu Lab A1	210°C	60°C	143 mm/s	✅
Bambu Lab A1 mini	210°C	60°C	143 mm/s	✅
Bambu Lab H2D	210°C	60°C	190 mm/s	✅
Bambu Lab P1P	210°C	60°C	171 mm/s	✅
Bambu Lab P1S	210°C	60°C	171 mm/s	✅
Bambu Lab X1 Carbon	210°C	60°C	190 mm/s	✅
Elegoo Centauri Carbon	210°C	60°C	171 mm/s	✅
Creality K1	210°C	60°C	171 mm/s	✅
Creality K1 Max	210°C	60°C	171 mm/s	✅
Creality K1C	210°C	60°C	171 mm/s	✅
Creality Ender 3	210°C	60°C	48 mm/s	✅
Creality Ender 3 Pro	210°C	60°C	48 mm/s	✅
Creality Ender 3 S1	210°C	60°C	76 mm/s	✅
Creality Ender 3 S1 Pro	210°C	60°C	86 mm/s	✅
Creality Ender 3 V2	210°C	60°C	57 mm/s	✅
Creality Ender 3 V3	210°C	60°C	114 mm/s	✅
Creality Ender 3 V3 KE	210°C	60°C	114 mm/s	✅
Creality Ender 3 V3 SE	210°C	60°C	86 mm/s	✅
Creality Ender 5 S1	210°C	60°C	114 mm/s	✅
Flashforge Adventurer 5M	210°C	60°C	143 mm/s	✅
Elegoo Neptune 4	210°C	60°C	114 mm/s	✅
Elegoo Neptune 4 Max	210°C	60°C	114 mm/s	✅
Elegoo Neptune 4 Pro	210°C	60°C	114 mm/s	✅
Prusa MINI+	210°C	60°C	95 mm/s	✅
Prusa MK3S+	210°C	60°C	95 mm/s	✅
Prusa MK4	210°C	60°C	133 mm/s	✅
Prusa MK4S	210°C	60°C	162 mm/s	✅
QIDI X-Plus 3	210°C	60°C	171 mm/s	✅
Sovol SV06	210°C	60°C	86 mm/s	✅
Sovol SV07	210°C	60°C	143 mm/s	✅
Voron 2.4	210°C	60°C	190 mm/s	✅

Sources & how we tuned this

These settings are community-tested starting points, cross-checked against manufacturer guidance and trusted material references:

Last verified: 2026-07-17. Always run a temperature tower and a small calibration print for your exact spool.