Home › Easy / Everyday › Tough PLA

Tough PLA print settings

Tough PLA behaves like an easy-printing ABS alternative for functional parts. Recommended baseline: 220°C hotend, 60°C bed, 80% part-cooling fan. Pick your printer below for a tuned profile.

⚡ Quick answer: Tough PLA prints best around 220°C hotend and 60°C bed. It is a intermediate-level filament.

Tough PLA settings by printer

Printer	Hotend	Bed	Speed	Fit
Anycubic Kobra S1	220°C	60°C	135 mm/s	✅
Anycubic Kobra 2	220°C	60°C	76 mm/s	✅
Anycubic Kobra 2 Pro	220°C	60°C	108 mm/s	✅
Bambu Lab A1	220°C	60°C	135 mm/s	✅
Bambu Lab A1 mini	220°C	60°C	135 mm/s	✅
Bambu Lab H2D	220°C	60°C	180 mm/s	✅
Bambu Lab P1P	220°C	60°C	162 mm/s	✅
Bambu Lab P1S	220°C	60°C	162 mm/s	✅
Bambu Lab X1 Carbon	220°C	60°C	180 mm/s	✅
Elegoo Centauri Carbon	220°C	60°C	162 mm/s	✅
Creality K1	220°C	60°C	162 mm/s	✅
Creality K1 Max	220°C	60°C	162 mm/s	✅
Creality K1C	220°C	60°C	162 mm/s	✅
Creality Ender 3	220°C	60°C	45 mm/s	✅
Creality Ender 3 Pro	220°C	60°C	45 mm/s	✅
Creality Ender 3 S1	220°C	60°C	72 mm/s	✅
Creality Ender 3 S1 Pro	220°C	60°C	81 mm/s	✅
Creality Ender 3 V2	220°C	60°C	54 mm/s	✅
Creality Ender 3 V3	220°C	60°C	108 mm/s	✅
Creality Ender 3 V3 KE	220°C	60°C	108 mm/s	✅
Creality Ender 3 V3 SE	220°C	60°C	81 mm/s	✅
Creality Ender 5 S1	220°C	60°C	108 mm/s	✅
Flashforge Adventurer 5M	220°C	60°C	135 mm/s	✅
Elegoo Neptune 4	220°C	60°C	108 mm/s	✅
Elegoo Neptune 4 Max	220°C	60°C	108 mm/s	✅
Elegoo Neptune 4 Pro	220°C	60°C	108 mm/s	✅
Prusa MINI+	220°C	60°C	90 mm/s	✅
Prusa MK3S+	220°C	60°C	90 mm/s	✅
Prusa MK4	220°C	60°C	126 mm/s	✅
Prusa MK4S	220°C	60°C	153 mm/s	✅
QIDI X-Plus 3	220°C	60°C	162 mm/s	✅
Sovol SV06	220°C	60°C	81 mm/s	✅
Sovol SV07	220°C	60°C	135 mm/s	✅
Voron 2.4	220°C	60°C	180 mm/s	✅

Sources & how we tuned this

These settings are community-tested starting points, cross-checked against manufacturer guidance and trusted material references:

Last verified: 2026-07-17. Always run a temperature tower and a small calibration print for your exact spool.