Home › Engineering › PETG HF

PETG HF print settings

High-flow PETG is tuned for faster printing on modern high-speed machines. Recommended baseline: 245°C hotend, 80°C bed, 50% part-cooling fan. Pick your printer below for a tuned profile.

⚡ Quick answer: PETG HF prints best around 245°C hotend and 80°C bed. It is a intermediate-level filament.

PETG HF settings by printer

Printer	Hotend	Bed	Speed	Fit
Anycubic Kobra S1	245°C	80°C	158 mm/s	✅
Anycubic Kobra 2	245°C	80°C	88 mm/s	✅
Anycubic Kobra 2 Pro	245°C	80°C	126 mm/s	✅
Bambu Lab A1	245°C	80°C	158 mm/s	✅
Bambu Lab A1 mini	245°C	80°C	158 mm/s	✅
Bambu Lab H2D	245°C	80°C	210 mm/s	✅
Bambu Lab P1P	245°C	80°C	189 mm/s	✅
Bambu Lab P1S	245°C	80°C	189 mm/s	✅
Bambu Lab X1 Carbon	245°C	80°C	210 mm/s	✅
Elegoo Centauri Carbon	245°C	80°C	189 mm/s	✅
Creality K1	245°C	80°C	189 mm/s	✅
Creality K1 Max	245°C	80°C	189 mm/s	✅
Creality K1C	245°C	80°C	189 mm/s	✅
Creality Ender 3	245°C	80°C	53 mm/s	✅
Creality Ender 3 Pro	245°C	80°C	53 mm/s	✅
Creality Ender 3 S1	245°C	80°C	84 mm/s	✅
Creality Ender 3 S1 Pro	245°C	80°C	95 mm/s	✅
Creality Ender 3 V2	245°C	80°C	63 mm/s	✅
Creality Ender 3 V3	245°C	80°C	126 mm/s	✅
Creality Ender 3 V3 KE	245°C	80°C	126 mm/s	✅
Creality Ender 3 V3 SE	245°C	80°C	95 mm/s	✅
Creality Ender 5 S1	245°C	80°C	126 mm/s	✅
Flashforge Adventurer 5M	245°C	80°C	158 mm/s	✅
Elegoo Neptune 4	245°C	80°C	126 mm/s	✅
Elegoo Neptune 4 Max	245°C	80°C	126 mm/s	✅
Elegoo Neptune 4 Pro	245°C	80°C	126 mm/s	✅
Prusa MINI+	245°C	80°C	105 mm/s	✅
Prusa MK3S+	245°C	80°C	105 mm/s	✅
Prusa MK4	245°C	80°C	147 mm/s	✅
Prusa MK4S	245°C	80°C	179 mm/s	✅
QIDI X-Plus 3	245°C	80°C	189 mm/s	✅
Sovol SV06	245°C	80°C	95 mm/s	✅
Sovol SV07	245°C	80°C	158 mm/s	✅
Voron 2.4	245°C	80°C	210 mm/s	✅

Sources & how we tuned this

These settings are community-tested starting points, cross-checked against manufacturer guidance and trusted material references:

Last verified: 2026-07-17. Always run a temperature tower and a small calibration print for your exact spool.