Home › Engineering › PETG
PETG print settings
PETG is strong and weather-resistant but strings easily, so tune retraction and keep the fan low. A good universal starting point is 240°C hotend, 80°C bed and 50 mm/s, but the exact numbers depend on your printer — pick yours below.
230–250°C
Hotend range
80°C
Bed
Intermediate
Difficulty
PETG settings by printer
| Printer | Hotend | Bed | Speed | Retr. |
|---|---|---|---|---|
| Creality Ender 3 V3 SE | 240°C | 80°C | 50 mm/s | 1.5 mm |
| Creality Ender 3 V2 | 240°C | 80°C | 50 mm/s | 6 mm |
| Creality Ender 3 S1 Pro | 240°C | 80°C | 50 mm/s | 1.5 mm |
| Bambu Lab A1 | 240°C | 80°C | 70 mm/s | 1.5 mm |
| Bambu Lab A1 mini | 240°C | 80°C | 70 mm/s | 1.5 mm |
| Bambu Lab P1P | 240°C | 80°C | 70 mm/s | 1.5 mm |
| Bambu Lab P1S | 240°C | 80°C | 70 mm/s | 1.5 mm |
| Bambu Lab X1 Carbon | 240°C | 80°C | 70 mm/s | 1.5 mm |
| Prusa MK4 | 240°C | 80°C | 70 mm/s | 1.5 mm |
| Prusa MINI+ | 240°C | 80°C | 50 mm/s | 6 mm |
| Anycubic Kobra 2 | 240°C | 80°C | 70 mm/s | 1.5 mm |
| Sovol SV06 | 240°C | 80°C | 50 mm/s | 1.5 mm |
| Creality K1 | 240°C | 80°C | 70 mm/s | 1.5 mm |
| Creality K1 Max | 240°C | 80°C | 70 mm/s | 1.5 mm |
| Elegoo Neptune 4 | 240°C | 80°C | 70 mm/s | 1.5 mm |
| Voron 2.4 | 240°C | 80°C | 70 mm/s | 1.5 mm |