Home › Engineering › PETG-CF
PETG-CF print settings
Carbon-fibre PETG combines PETG toughness with extra stiffness and demands a hardened nozzle. A good universal starting point is 250°C hotend, 80°C bed and 45 mm/s, but the exact numbers depend on your printer — pick yours below.
240–260°C
Hotend range
80°C
Bed
Advanced
Difficulty
PETG-CF settings by printer
| Printer | Hotend | Bed | Speed | Retr. |
|---|---|---|---|---|
| Creality Ender 3 V3 SE | 240°C | 80°C | 45 mm/s | 1.5 mm |
| Creality Ender 3 V2 | 240°C | 80°C | 45 mm/s | 6 mm |
| Creality Ender 3 S1 Pro | 250°C | 80°C | 45 mm/s | 1.5 mm |
| Bambu Lab A1 | 250°C | 80°C | 63 mm/s | 1.5 mm |
| Bambu Lab A1 mini | 250°C | 80°C | 63 mm/s | 1.5 mm |
| Bambu Lab P1P | 250°C | 80°C | 63 mm/s | 1.5 mm |
| Bambu Lab P1S | 250°C | 80°C | 63 mm/s | 1.5 mm |
| Bambu Lab X1 Carbon | 250°C | 80°C | 63 mm/s | 1.5 mm |
| Prusa MK4 | 250°C | 80°C | 63 mm/s | 1.5 mm |
| Prusa MINI+ | 250°C | 80°C | 45 mm/s | 6 mm |
| Anycubic Kobra 2 | 240°C | 80°C | 63 mm/s | 1.5 mm |
| Sovol SV06 | 250°C | 80°C | 45 mm/s | 1.5 mm |
| Creality K1 | 250°C | 80°C | 63 mm/s | 1.5 mm |
| Creality K1 Max | 250°C | 80°C | 63 mm/s | 1.5 mm |
| Elegoo Neptune 4 | 250°C | 80°C | 63 mm/s | 1.5 mm |
| Voron 2.4 | 250°C | 80°C | 63 mm/s | 1.5 mm |