Home › Engineering › ABS
ABS print settings
ABS warps badly without an enclosure and needs ventilation because of fumes. A good universal starting point is 245°C hotend, 100°C bed and 50 mm/s, but the exact numbers depend on your printer — pick yours below.
230–255°C
Hotend range
100°C
Bed
Advanced
Difficulty
ABS settings by printer
| Printer | Hotend | Bed | Speed | Retr. |
|---|---|---|---|---|
| Creality Ender 3 V3 SE | 240°C | 100°C | 50 mm/s | 1 mm |
| Creality Ender 3 V2 | 240°C | 100°C | 50 mm/s | 6 mm |
| Creality Ender 3 S1 Pro | 245°C | 100°C | 50 mm/s | 1 mm |
| Bambu Lab A1 | 245°C | 100°C | 70 mm/s | 1 mm |
| Bambu Lab A1 mini | 245°C | 80°C | 70 mm/s | 1 mm |
| Bambu Lab P1P | 245°C | 100°C | 70 mm/s | 1 mm |
| Bambu Lab P1S | 245°C | 100°C | 70 mm/s | 1 mm |
| Bambu Lab X1 Carbon | 245°C | 100°C | 70 mm/s | 1 mm |
| Prusa MK4 | 245°C | 100°C | 70 mm/s | 1 mm |
| Prusa MINI+ | 245°C | 100°C | 50 mm/s | 6 mm |
| Anycubic Kobra 2 | 240°C | 100°C | 70 mm/s | 1 mm |
| Sovol SV06 | 245°C | 100°C | 50 mm/s | 1 mm |
| Creality K1 | 245°C | 100°C | 70 mm/s | 1 mm |
| Creality K1 Max | 245°C | 100°C | 70 mm/s | 1 mm |
| Elegoo Neptune 4 | 245°C | 100°C | 70 mm/s | 1 mm |
| Voron 2.4 | 245°C | 100°C | 70 mm/s | 1 mm |