Home › Printers › Prusa MK3S+

Prusa MK3S+ filament settings guide

The Prusa MK3S+ has a direct-drive extruder with an all-metal hotend. Below are tuned starting profiles for every common filament on the Prusa MK3S+.

⚡ Quick answer: The Prusa MK3S+ handles PLA, PETG and TPU easily, and its all-metal hotend opens up higher-temp materials.

Filament profiles for the Prusa MK3S+

Material	Hotend	Bed	Speed	Fit
PLA	205°C	60°C	100 mm/s	✅
PLA+	215°C	60°C	95 mm/s	✅
Silk PLA	215°C	60°C	85 mm/s	✅
Matte PLA	210°C	60°C	95 mm/s	✅
Wood PLA	210°C	60°C	80 mm/s	✅
Tough PLA	220°C	60°C	90 mm/s	✅
PVB	215°C	70°C	85 mm/s	✅
PETG	240°C	80°C	75 mm/s	✅
PETG-CF	250°C	80°C	75 mm/s	✅
PETG HF	245°C	80°C	105 mm/s	✅
ABS	245°C	100°C	70 mm/s	⚠️
ASA	250°C	100°C	70 mm/s	⚠️
Nylon (PA)	260°C	90°C	65 mm/s	⚠️
Nylon CF	265°C	90°C	65 mm/s	⚠️
PLA-CF	220°C	60°C	90 mm/s	✅
Polycarbonate	280°C	110°C	55 mm/s	⚠️
TPU	225°C	45°C	35 mm/s	✅
TPU 85A	230°C	45°C	25 mm/s	✅
HIPS	240°C	100°C	70 mm/s	⚠️
PVA	200°C	60°C	60 mm/s	✅

These settings are community-tested starting points, cross-checked against manufacturer guidance and trusted material references:

Last verified: 2026-07-17. Always run a temperature tower and a small calibration print for your exact spool.