The Bambu Lab P1S (Bambu Lab) has a direct-drive extruder, an all-metal hotend and an enclosed chamber, with a 300°C max hotend and 100°C max bed (256 × 256 × 256 mm). Of 14 common filaments, 14 are a great match on this hardware out of the box.
What filaments does the Bambu Lab P1S support? The Bambu Lab P1S supports 14 filaments out of the box. Its all-metal hotend, direct-drive extruder and 100°C bed decide what it can run.
300°
Max hotend
100°
Max bed
14/14
Great matches
Fast
Speed class
Bambu Lab P1S filament compatibility
| ✅ Great match (print now) | PLA, PLA+, Silk PLA, Wood PLA, PETG, ABS, ASA, Nylon (PA), Polycarbonate, PLA-CF, PETG-CF, TPU, PVA, HIPS |
| ⚠️ Possible with tweaks | none |
| ❌ Not recommended as-is | none |
| Hotend | All-metal — high-temp capable |
| Extruder | Direct drive — good for flexibles |
| Chamber | Enclosed — ABS/ASA friendly |
Every filament on the Bambu Lab P1S: settings table
| Filament | Hotend | Bed | Speed | Retract |
|---|---|---|---|---|
| ✅ PLA | 205°C | 60°C | 84 mm/s | 0.8 mm |
| ✅ PLA+ | 215°C | 60°C | 77 mm/s | 0.8 mm |
| ✅ Silk PLA | 215°C | 55°C | 56 mm/s | 0.9 mm |
| ✅ Wood PLA | 200°C | 55°C | 63 mm/s | 0.8 mm |
| ✅ PETG | 240°C | 80°C | 70 mm/s | 1.5 mm |
| ✅ ABS | 245°C | 100°C | 70 mm/s | 1 mm |
| ✅ ASA | 250°C | 100°C | 63 mm/s | 1 mm |
| ✅ Nylon (PA) | 260°C | 90°C | 56 mm/s | 1.5 mm |
| ✅ Polycarbonate | 275°C | 100°C | 49 mm/s | 1.2 mm |
| ✅ PLA-CF | 215°C | 60°C | 70 mm/s | 0.8 mm |
| ✅ PETG-CF | 250°C | 80°C | 63 mm/s | 1.5 mm |
| ✅ TPU | 225°C | 50°C | 25 mm/s | 1 mm |
| ✅ PVA | 200°C | 60°C | 42 mm/s | 1 mm |
| ✅ HIPS | 235°C | 100°C | 63 mm/s | 1 mm |
✅ great match · ⚠️ possible with tweaks · ❌ not recommended on this hardware.
FAQ
What filaments does the Bambu Lab P1S support?
Can the Bambu Lab P1S print PETG?
Yes. PETG prints well on the Bambu Lab P1S at about 240°C hotend and 80°C bed. See the full Bambu Lab P1S PETG profile.
Can the Bambu Lab P1S print ABS or ASA?
Yes — the Bambu Lab P1S is enclosed, which is exactly what ABS and ASA need to avoid warping.
Does the Bambu Lab P1S need an all-metal hotend for high-temp filament?
No — the Bambu Lab P1S already has an all-metal hotend, so it can safely reach the temperatures needed for ABS, ASA, PC and nylon (within its 300°C limit).
Reviewed 2026-08-18.