The Bambu Lab H2D (Bambu Lab) has a direct-drive extruder, an all-metal hotend and an enclosed chamber, with a 320°C max hotend and 110°C max bed (350 × 320 × 325 mm). Of 14 common filaments, 14 are a great match on this hardware out of the box.
What filaments does the Bambu Lab H2D support? The Bambu Lab H2D supports 14 filaments out of the box. Its all-metal hotend, direct-drive extruder and 110°C bed decide what it can run.
320°
Max hotend
110°
Max bed
14/14
Great matches
Fast
Speed class
Bambu Lab H2D filament compatibility
| ✅ Great match (print now) | PLA, PLA+, Silk PLA, Wood PLA, PETG, ABS, ASA, Nylon (PA), Polycarbonate, PLA-CF, PETG-CF, TPU, PVA, HIPS |
| ⚠️ Possible with tweaks | none |
| ❌ Not recommended as-is | none |
| Hotend | All-metal — high-temp capable |
| Extruder | Direct drive — good for flexibles |
| Chamber | Enclosed — ABS/ASA friendly |
Every filament on the Bambu Lab H2D: settings table
| Filament | Hotend | Bed | Speed | Retract |
|---|---|---|---|---|
| ✅ PLA | 205°C | 60°C | 84 mm/s | 0.8 mm |
| ✅ PLA+ | 215°C | 60°C | 77 mm/s | 0.8 mm |
| ✅ Silk PLA | 215°C | 55°C | 56 mm/s | 0.9 mm |
| ✅ Wood PLA | 200°C | 55°C | 63 mm/s | 0.8 mm |
| ✅ PETG | 240°C | 80°C | 70 mm/s | 1.5 mm |
| ✅ ABS | 245°C | 100°C | 70 mm/s | 1 mm |
| ✅ ASA | 250°C | 100°C | 63 mm/s | 1 mm |
| ✅ Nylon (PA) | 260°C | 90°C | 56 mm/s | 1.5 mm |
| ✅ Polycarbonate | 275°C | 110°C | 49 mm/s | 1.2 mm |
| ✅ PLA-CF | 215°C | 60°C | 70 mm/s | 0.8 mm |
| ✅ PETG-CF | 250°C | 80°C | 63 mm/s | 1.5 mm |
| ✅ TPU | 225°C | 50°C | 25 mm/s | 1 mm |
| ✅ PVA | 200°C | 60°C | 42 mm/s | 1 mm |
| ✅ HIPS | 235°C | 100°C | 63 mm/s | 1 mm |
✅ great match · ⚠️ possible with tweaks · ❌ not recommended on this hardware.
FAQ
What filaments does the Bambu Lab H2D support?
Can the Bambu Lab H2D print PETG?
Yes. PETG prints well on the Bambu Lab H2D at about 240°C hotend and 80°C bed. See the full Bambu Lab H2D PETG profile.
Can the Bambu Lab H2D print ABS or ASA?
Yes — the Bambu Lab H2D is enclosed, which is exactly what ABS and ASA need to avoid warping.
Does the Bambu Lab H2D need an all-metal hotend for high-temp filament?
No — the Bambu Lab H2D already has an all-metal hotend, so it can safely reach the temperatures needed for ABS, ASA, PC and nylon (within its 320°C limit).
Reviewed 2026-08-18.