The Bambu Lab X1 Carbon (Bambu Lab) has a direct-drive extruder, an all-metal hotend and an enclosed chamber, with a 300°C max hotend and 110°C max bed (256 × 256 × 256 mm). Of 14 common filaments, 14 are a great match on this hardware out of the box.
What filaments does the Bambu Lab X1 Carbon support? The Bambu Lab X1 Carbon supports 14 filaments out of the box. Its all-metal hotend, direct-drive extruder and 110°C bed decide what it can run.
300°
Max hotend
110°
Max bed
14/14
Great matches
Fast
Speed class
Bambu Lab X1 Carbon filament compatibility
| ✅ Great match (print now) | PLA, PLA+, Silk PLA, Wood PLA, PETG, ABS, ASA, Nylon (PA), Polycarbonate, PLA-CF, PETG-CF, TPU, PVA, HIPS |
| ⚠️ Possible with tweaks | none |
| ❌ Not recommended as-is | none |
| Hotend | All-metal — high-temp capable |
| Extruder | Direct drive — good for flexibles |
| Chamber | Enclosed — ABS/ASA friendly |
Every filament on the Bambu Lab X1 Carbon: settings table
| Filament | Hotend | Bed | Speed | Retract |
|---|---|---|---|---|
| ✅ PLA | 205°C | 60°C | 84 mm/s | 0.8 mm |
| ✅ PLA+ | 215°C | 60°C | 77 mm/s | 0.8 mm |
| ✅ Silk PLA | 215°C | 55°C | 56 mm/s | 0.9 mm |
| ✅ Wood PLA | 200°C | 55°C | 63 mm/s | 0.8 mm |
| ✅ PETG | 240°C | 80°C | 70 mm/s | 1.5 mm |
| ✅ ABS | 245°C | 100°C | 70 mm/s | 1 mm |
| ✅ ASA | 250°C | 100°C | 63 mm/s | 1 mm |
| ✅ Nylon (PA) | 260°C | 90°C | 56 mm/s | 1.5 mm |
| ✅ Polycarbonate | 275°C | 110°C | 49 mm/s | 1.2 mm |
| ✅ PLA-CF | 215°C | 60°C | 70 mm/s | 0.8 mm |
| ✅ PETG-CF | 250°C | 80°C | 63 mm/s | 1.5 mm |
| ✅ TPU | 225°C | 50°C | 25 mm/s | 1 mm |
| ✅ PVA | 200°C | 60°C | 42 mm/s | 1 mm |
| ✅ HIPS | 235°C | 100°C | 63 mm/s | 1 mm |
✅ great match · ⚠️ possible with tweaks · ❌ not recommended on this hardware.
FAQ
What filaments does the Bambu Lab X1 Carbon support?
Can the Bambu Lab X1 Carbon print PETG?
Yes. PETG prints well on the Bambu Lab X1 Carbon at about 240°C hotend and 80°C bed. See the full Bambu Lab X1 Carbon PETG profile.
Can the Bambu Lab X1 Carbon print ABS or ASA?
Yes — the Bambu Lab X1 Carbon is enclosed, which is exactly what ABS and ASA need to avoid warping.
Does the Bambu Lab X1 Carbon need an all-metal hotend for high-temp filament?
No — the Bambu Lab X1 Carbon already has an all-metal hotend, so it can safely reach the temperatures needed for ABS, ASA, PC and nylon (within its 300°C limit).
Reviewed 2026-08-18.