The Bambu Lab P1P (Bambu Lab) has a direct-drive extruder, an all-metal hotend, with a 300°C max hotend and 100°C max bed (256 × 256 × 256 mm). Of 14 common filaments, 9 are a great match on this hardware out of the box.
What filaments does the Bambu Lab P1P support? The Bambu Lab P1P supports 9 filaments out of the box and can handle 5 more with tweaks (usually an enclosure or slower speed). Its all-metal hotend, direct-drive extruder and 100°C bed decide what it can run.
300°
Max hotend
100°
Max bed
9/14
Great matches
Fast
Speed class
Bambu Lab P1P filament compatibility
| ✅ Great match (print now) | PLA, PLA+, Silk PLA, Wood PLA, PETG, PLA-CF, PETG-CF, TPU, PVA |
| ⚠️ Possible with tweaks | ABS, ASA, Nylon (PA), Polycarbonate, HIPS |
| ❌ Not recommended as-is | none |
| Hotend | All-metal — high-temp capable |
| Extruder | Direct drive — good for flexibles |
| Chamber | Open frame — warp-prone materials need help |
Every filament on the Bambu Lab P1P: settings table
| Filament | Hotend | Bed | Speed | Retract |
|---|---|---|---|---|
| ✅ PLA | 205°C | 60°C | 84 mm/s | 0.8 mm |
| ✅ PLA+ | 215°C | 60°C | 77 mm/s | 0.8 mm |
| ✅ Silk PLA | 215°C | 55°C | 56 mm/s | 0.9 mm |
| ✅ Wood PLA | 200°C | 55°C | 63 mm/s | 0.8 mm |
| ✅ PETG | 240°C | 80°C | 70 mm/s | 1.5 mm |
| ⚠️ ABS | 245°C | 100°C | 70 mm/s | 1 mm |
| ⚠️ ASA | 250°C | 100°C | 63 mm/s | 1 mm |
| ⚠️ Nylon (PA) | 260°C | 90°C | 56 mm/s | 1.5 mm |
| ⚠️ Polycarbonate | 275°C | 100°C | 49 mm/s | 1.2 mm |
| ✅ PLA-CF | 215°C | 60°C | 70 mm/s | 0.8 mm |
| ✅ PETG-CF | 250°C | 80°C | 63 mm/s | 1.5 mm |
| ✅ TPU | 225°C | 50°C | 25 mm/s | 1 mm |
| ✅ PVA | 200°C | 60°C | 42 mm/s | 1 mm |
| ⚠️ HIPS | 235°C | 100°C | 63 mm/s | 1 mm |
✅ great match · ⚠️ possible with tweaks · ❌ not recommended on this hardware.
FAQ
What filaments does the Bambu Lab P1P support?
Can the Bambu Lab P1P print PETG?
Yes. PETG prints well on the Bambu Lab P1P at about 240°C hotend and 80°C bed. See the full Bambu Lab P1P PETG profile.
Can the Bambu Lab P1P print ABS or ASA?
The Bambu Lab P1P is open-frame, so ABS and ASA are possible but will warp on larger parts without an enclosure or draft shield. The hotend can reach the temperatures needed.
Does the Bambu Lab P1P need an all-metal hotend for high-temp filament?
No — the Bambu Lab P1P already has an all-metal hotend, so it can safely reach the temperatures needed for ABS, ASA, PC and nylon (within its 300°C limit).
Reviewed 2026-08-18.