PolyLite PLA ~210°C, PolyMax PETG ~245°C; Polymaker publishes exact per-product ranges worth following. Below is a safe starting profile for Polymaker PLA-CF, plus the exact numbers capped to popular printers. Carbon-fibre PLA is stiffer and matte but the fibres chew through brass nozzles fast.
Quick answer: 215°C nozzle · 60°C bed · 50 mm/s · 0.8 mm retraction (direct drive). Tune per spool with a temperature tower.
215°
Hotend
60°
Bed
50
mm/s
100%
Part fan
What to expect from Polymaker PLA-CF
Carbon-fibre PLA prints at PLA-like temperatures but the abrasive fibres are what matter — every brand will destroy a brass nozzle. A hardened steel nozzle is mandatory regardless of brand.
🔎 CF-PLA is stiffer and has a premium matte look, but it is not "stronger" in every sense — it’s more rigid and slightly more brittle. Great for parts that must not flex, less good for parts that take impacts.
Polymaker PLA-CF on popular printers
| Printer | Hotend | Bed | Speed |
|---|---|---|---|
| Creality Ender 3 V3 SE | 215°C | 60°C | 50 mm/s |
| Creality Ender 3 V2 | 215°C | 60°C | 50 mm/s |
| Creality Ender 3 S1 Pro | 215°C | 60°C | 50 mm/s |
| Bambu Lab A1 | 215°C | 60°C | 70 mm/s |
| Bambu Lab A1 mini | 215°C | 60°C | 70 mm/s |
| Bambu Lab P1P | 215°C | 60°C | 70 mm/s |
| Bambu Lab P1S | 215°C | 60°C | 70 mm/s |
| Bambu Lab X1 Carbon | 215°C | 60°C | 70 mm/s |
| Prusa MK4 | 215°C | 60°C | 70 mm/s |
| Prusa MINI+ | 215°C | 60°C | 50 mm/s |
See PLA-CF on all 25 printers →
FAQ
What temperature should I print Polymaker PLA-CF at?
Start around 215°C hotend and 60°C bed, then run a temperature tower across 205–230°C. PolyLite PLA ~210°C, PolyMax PETG ~245°C; Polymaker publishes exact per-product ranges worth following.
Is Polymaker PLA-CF good quality?
Premium quality and excellent spec sheets; the go-to for ASA, PC and engineering blends. As always, dry the spool if you see stringing or popping and calibrate flow before judging a brand.
Do I need to dry Polymaker PLA-CF?
Usually not, but if a spool has sat in humid air and strings badly, a few hours of drying helps.
Reviewed 2026-08-18. Independent guidance; not affiliated with Polymaker.