The Creality Ender 3 S1 Pro (Creality) has a direct-drive extruder, an all-metal hotend, with a 300°C max hotend and 110°C max bed (220 × 220 × 270 mm). Of 14 common filaments, 9 are a great match on this hardware out of the box.
What filaments does the Creality Ender 3 S1 Pro support? The Creality Ender 3 S1 Pro supports 9 filaments out of the box and can handle 5 more with tweaks (usually an enclosure or slower speed). Its all-metal hotend, direct-drive extruder and 110°C bed decide what it can run.
300°
Max hotend
110°
Max bed
9/14
Great matches
Std
Speed class
Creality Ender 3 S1 Pro filament compatibility
| ✅ Great match (print now) | PLA, PLA+, Silk PLA, Wood PLA, PETG, PLA-CF, PETG-CF, TPU, PVA |
| ⚠️ Possible with tweaks | ABS, ASA, Nylon (PA), Polycarbonate, HIPS |
| ❌ Not recommended as-is | none |
| Hotend | All-metal — high-temp capable |
| Extruder | Direct drive — good for flexibles |
| Chamber | Open frame — warp-prone materials need help |
Every filament on the Creality Ender 3 S1 Pro: settings table
| Filament | Hotend | Bed | Speed | Retract |
|---|---|---|---|---|
| ✅ PLA | 205°C | 60°C | 60 mm/s | 0.8 mm |
| ✅ PLA+ | 215°C | 60°C | 55 mm/s | 0.8 mm |
| ✅ Silk PLA | 215°C | 55°C | 40 mm/s | 0.9 mm |
| ✅ Wood PLA | 200°C | 55°C | 45 mm/s | 0.8 mm |
| ✅ PETG | 240°C | 80°C | 50 mm/s | 1.5 mm |
| ⚠️ ABS | 245°C | 100°C | 50 mm/s | 1 mm |
| ⚠️ ASA | 250°C | 100°C | 45 mm/s | 1 mm |
| ⚠️ Nylon (PA) | 260°C | 90°C | 40 mm/s | 1.5 mm |
| ⚠️ Polycarbonate | 275°C | 110°C | 35 mm/s | 1.2 mm |
| ✅ PLA-CF | 215°C | 60°C | 50 mm/s | 0.8 mm |
| ✅ PETG-CF | 250°C | 80°C | 45 mm/s | 1.5 mm |
| ✅ TPU | 225°C | 50°C | 25 mm/s | 1 mm |
| ✅ PVA | 200°C | 60°C | 30 mm/s | 1 mm |
| ⚠️ HIPS | 235°C | 100°C | 45 mm/s | 1 mm |
✅ great match · ⚠️ possible with tweaks · ❌ not recommended on this hardware.
FAQ
What filaments does the Creality Ender 3 S1 Pro support?
Can the Creality Ender 3 S1 Pro print PETG?
Yes. PETG prints well on the Creality Ender 3 S1 Pro at about 240°C hotend and 80°C bed. See the full Creality Ender 3 S1 Pro PETG profile.
Can the Creality Ender 3 S1 Pro print ABS or ASA?
The Creality Ender 3 S1 Pro is open-frame, so ABS and ASA are possible but will warp on larger parts without an enclosure or draft shield. The hotend can reach the temperatures needed.
Does the Creality Ender 3 S1 Pro need an all-metal hotend for high-temp filament?
No — the Creality Ender 3 S1 Pro already has an all-metal hotend, so it can safely reach the temperatures needed for ABS, ASA, PC and nylon (within its 300°C limit).
Reviewed 2026-08-18.