Budget brand popular for value multipacks and its own filament dryers. This page collects recommended starting temperatures and settings for SUNLU filament, then links each material to a full, hardware-aware profile for your specific printer.
SUNLU temperatures at a glance: SUNLU PLA+ ~210–220°C; the Silk PLA prints best slow and slightly hot.
SUNLU settings by material
| SUNLU filament | Hotend | Bed | Speed | Difficulty |
|---|---|---|---|---|
| SUNLU PLA | 205°C | 60°C | 60 mm/s | Beginner |
| SUNLU PLA+ | 215°C | 60°C | 55 mm/s | Beginner |
| SUNLU PETG | 240°C | 80°C | 50 mm/s | Intermediate |
| SUNLU Silk PLA | 215°C | 55°C | 40 mm/s | Beginner |
| SUNLU TPU | 225°C | 50°C | 25 mm/s | Intermediate |
💡 Cheap per kg and sold in bundles; quality is good once filament is kept dry. Numbers are starting points — run a temperature tower per spool, since even one brand varies by colour and batch.
Pick your SUNLU material
SUNLU PLA205°C · bed 60°CSUNLU PLA+215°C · bed 60°CSUNLU PETG240°C · bed 80°CSUNLU Silk PLA215°C · bed 55°CSUNLU TPU225°C · bed 50°C
Reviewed 2026-08-18. SUNLU is an independent brand; FilamentPick is not affiliated. Settings are conservative starting points.