One of the largest budget-to-midrange filament makers, best known for PLA+ and value multipacks. This page collects recommended starting temperatures and settings for eSUN filament, then links each material to a full, hardware-aware profile for your specific printer.
eSUN temperatures at a glance: eSUN PLA+ likes 210–225°C — a little hotter than basic PLA. eSUN PETG runs well around 240–245°C.
eSUN settings by material
| eSUN filament | Hotend | Bed | Speed | Difficulty |
|---|---|---|---|---|
| eSUN PLA | 205°C | 60°C | 60 mm/s | Beginner |
| eSUN PLA+ | 215°C | 60°C | 55 mm/s | Beginner |
| eSUN PETG | 240°C | 80°C | 50 mm/s | Intermediate |
| eSUN ABS | 245°C | 100°C | 50 mm/s | Advanced |
| eSUN TPU | 225°C | 50°C | 25 mm/s | Intermediate |
| eSUN PLA-CF | 215°C | 60°C | 50 mm/s | Intermediate |
| eSUN PVA | 200°C | 60°C | 30 mm/s | Advanced |
💡 Strong price-to-quality, widely stocked. PLA+ is the flagship and a good default tough PLA. Numbers are starting points — run a temperature tower per spool, since even one brand varies by colour and batch.
Pick your eSUN material
eSUN PLA205°C · bed 60°CeSUN PLA+215°C · bed 60°CeSUN PETG240°C · bed 80°CeSUN ABS245°C · bed 100°CeSUN TPU225°C · bed 50°CeSUN PLA-CF215°C · bed 60°CeSUN PVA200°C · bed 60°C
Reviewed 2026-08-18. eSUN is an independent brand; FilamentPick is not affiliated. Settings are conservative starting points.