The Creality Ender 3 V3 SE (Creality) has a direct-drive extruder, a PTFE-lined hotend, with a 260°C max hotend and 100°C max bed (220 × 220 × 250 mm). Of 14 common filaments, 9 are a great match on this hardware out of the box.
What filaments does the Creality Ender 3 V3 SE support? The Creality Ender 3 V3 SE supports 9 filaments out of the box and can handle 4 more with tweaks (usually an enclosure or slower speed). Its PTFE-lined hotend (keep it ≤240°C), direct-drive extruder and 100°C bed decide what it can run.
260°
Max hotend
100°
Max bed
9/14
Great matches
Std
Speed class
Creality Ender 3 V3 SE filament compatibility
| ✅ Great match (print now) | PLA, PLA+, Silk PLA, Wood PLA, PETG, PLA-CF, PETG-CF, TPU, PVA |
| ⚠️ Possible with tweaks | ABS, ASA, Nylon (PA), HIPS |
| ❌ Not recommended as-is | Polycarbonate |
| Hotend | PTFE-lined — 240°C limit |
| Extruder | Direct drive — good for flexibles |
| Chamber | Open frame — warp-prone materials need help |
Every filament on the Creality Ender 3 V3 SE: settings table
| Filament | Hotend | Bed | Speed | Retract |
|---|---|---|---|---|
| ✅ PLA | 205°C | 60°C | 60 mm/s | 0.8 mm |
| ✅ PLA+ | 215°C | 60°C | 55 mm/s | 0.8 mm |
| ✅ Silk PLA | 215°C | 55°C | 40 mm/s | 0.9 mm |
| ✅ Wood PLA | 200°C | 55°C | 45 mm/s | 0.8 mm |
| ✅ PETG | 240°C | 80°C | 50 mm/s | 1.5 mm |
| ⚠️ ABS | 240°C | 100°C | 50 mm/s | 1 mm |
| ⚠️ ASA | 240°C | 100°C | 45 mm/s | 1 mm |
| ⚠️ Nylon (PA) | 240°C | 90°C | 40 mm/s | 1.5 mm |
| ❌ Polycarbonate | 240°C | 100°C | 35 mm/s | 1.2 mm |
| ✅ PLA-CF | 215°C | 60°C | 50 mm/s | 0.8 mm |
| ✅ PETG-CF | 240°C | 80°C | 45 mm/s | 1.5 mm |
| ✅ TPU | 225°C | 50°C | 25 mm/s | 1 mm |
| ✅ PVA | 200°C | 60°C | 30 mm/s | 1 mm |
| ⚠️ HIPS | 235°C | 100°C | 45 mm/s | 1 mm |
✅ great match · ⚠️ possible with tweaks · ❌ not recommended on this hardware.
FAQ
What filaments does the Creality Ender 3 V3 SE support?
Out of the box the Creality Ender 3 V3 SE is a great match for PLA, PLA+, Silk PLA, Wood PLA, PETG, PLA-CF, PETG-CF, TPU, PVA. It can also print ABS, ASA, Nylon (PA), HIPS with the right setup (an enclosure or draft shield for warp-prone materials). We do not recommend Polycarbonate on this machine without hardware upgrades.
Can the Creality Ender 3 V3 SE print PETG?
Yes. PETG prints well on the Creality Ender 3 V3 SE at about 240°C hotend and 80°C bed. See the full Creality Ender 3 V3 SE PETG profile.
Can the Creality Ender 3 V3 SE print ABS or ASA?
The Creality Ender 3 V3 SE is open-frame, so ABS and ASA are possible but will warp on larger parts without an enclosure or draft shield. Its PTFE-lined hotend also limits you to 240°C, which is marginal for ABS/ASA.
Does the Creality Ender 3 V3 SE need an all-metal hotend for high-temp filament?
The Creality Ender 3 V3 SE has a PTFE-lined hotend, so keep it at or below 240°C. For hotter materials like polycarbonate you would need an all-metal hotend upgrade first.
Reviewed 2026-08-18.