Printer maker (Neptune series) that also sells competitively priced PLA and PETG. This page collects recommended starting temperatures and settings for ELEGOO filament, then links each material to a full, hardware-aware profile for your specific printer.
ELEGOO temperatures at a glance: ELEGOO PLA prints around 205–215°C and pairs naturally with its Neptune printers.
ELEGOO settings by material
| ELEGOO filament | Hotend | Bed | Speed | Difficulty |
|---|---|---|---|---|
| ELEGOO PLA | 205°C | 60°C | 60 mm/s | Beginner |
| ELEGOO PLA+ | 215°C | 60°C | 55 mm/s | Beginner |
| ELEGOO PETG | 240°C | 80°C | 50 mm/s | Intermediate |
| ELEGOO ABS | 245°C | 100°C | 50 mm/s | Advanced |
💡 Good value house-brand filament, convenient if you own an ELEGOO printer. Numbers are starting points — run a temperature tower per spool, since even one brand varies by colour and batch.
Pick your ELEGOO material
ELEGOO PLA205°C · bed 60°CELEGOO PLA+215°C · bed 60°CELEGOO PETG240°C · bed 80°CELEGOO ABS245°C · bed 100°C
Reviewed 2026-08-18. ELEGOO is an independent brand; FilamentPick is not affiliated. Settings are conservative starting points.