eSUN PLA+ likes 210–225°C — a little hotter than basic PLA. eSUN PETG runs well around 240–245°C. Below is a safe starting profile for eSUN ABS, plus the exact numbers capped to popular printers. ABS warps badly without an enclosure and needs ventilation because of fumes.
Quick answer: 245°C nozzle · 100°C bed · 50 mm/s · 1 mm retraction (direct drive). Tune per spool with a temperature tower.
245°
Hotend
100°
Bed
50
mm/s
0%
Part fan
What to expect from eSUN ABS
ABS quality varies mostly in warp resistance and smell. Brand-name ABS (and ABS+ blends) warps less and off-gasses less than the cheapest spools, but every ABS needs a stable, warm chamber.
🔎 ABS fumes (styrene) genuinely need ventilation — print it enclosed and vented, not in a bedroom. The enclosure isn’t just for warp control; it’s a safety item.
eSUN ABS on popular printers
| Printer | Hotend | Bed | Speed |
|---|---|---|---|
| Creality Ender 3 V3 SE | 240°C | 100°C | 50 mm/s |
| Creality Ender 3 V2 | 240°C | 100°C | 50 mm/s |
| Creality Ender 3 S1 Pro | 245°C | 100°C | 50 mm/s |
| Bambu Lab A1 | 245°C | 100°C | 70 mm/s |
| Bambu Lab A1 mini | 245°C | 80°C | 70 mm/s |
| Bambu Lab P1P | 245°C | 100°C | 70 mm/s |
| Bambu Lab P1S | 245°C | 100°C | 70 mm/s |
| Bambu Lab X1 Carbon | 245°C | 100°C | 70 mm/s |
| Prusa MK4 | 245°C | 100°C | 70 mm/s |
| Prusa MINI+ | 245°C | 100°C | 50 mm/s |
FAQ
What temperature should I print eSUN ABS at?
Start around 245°C hotend and 100°C bed, then run a temperature tower across 230–255°C. eSUN PLA+ likes 210–225°C — a little hotter than basic PLA. eSUN PETG runs well around 240–245°C.
Is eSUN ABS good quality?
Strong price-to-quality, widely stocked. PLA+ is the flagship and a good default tough PLA. As always, dry the spool if you see stringing or popping and calibrate flow before judging a brand.
Do I need to dry eSUN ABS?
Usually not, but if a spool has sat in humid air and strings badly, a few hours of drying helps.
Reviewed 2026-08-18. Independent guidance; not affiliated with eSUN.