Prusament PLA ~215°C and PETG ~240°C are dialled in for Prusa machines out of the box. Below is a safe starting profile for Prusament PLA, plus the exact numbers capped to popular printers. PLA is the easiest filament to print and the best starting point for any printer.
Quick answer: 205°C nozzle · 60°C bed · 60 mm/s · 0.8 mm retraction (direct drive). Tune per spool with a temperature tower.
205°
Hotend
60°
Bed
60
mm/s
100%
Part fan
What to expect from Prusament PLA
PLA is the least fussy filament to buy: almost any brand prints well between 195–215°C. Budget spools run slightly cooler and can be brittle; premium "matte" and "tough" PLAs often like 5–10°C more. The biggest quality difference between cheap and premium PLA is diameter consistency, which shows up as wall-thickness variation more than as a temperature change.
🔎 PLA’s real weakness is heat, not strength — a PLA part left in a hot car or sunny window will sag around 55–60°C. If a part needs to survive heat, that’s the signal to move to PETG or ABS rather than just printing PLA hotter.
Prusament PLA on popular printers
| Printer | Hotend | Bed | Speed |
|---|---|---|---|
| Creality Ender 3 V3 SE | 205°C | 60°C | 60 mm/s |
| Creality Ender 3 V2 | 205°C | 60°C | 60 mm/s |
| Creality Ender 3 S1 Pro | 205°C | 60°C | 60 mm/s |
| Bambu Lab A1 | 205°C | 60°C | 84 mm/s |
| Bambu Lab A1 mini | 205°C | 60°C | 84 mm/s |
| Bambu Lab P1P | 205°C | 60°C | 84 mm/s |
| Bambu Lab P1S | 205°C | 60°C | 84 mm/s |
| Bambu Lab X1 Carbon | 205°C | 60°C | 84 mm/s |
| Prusa MK4 | 205°C | 60°C | 84 mm/s |
| Prusa MINI+ | 205°C | 60°C | 60 mm/s |
FAQ
What temperature should I print Prusament PLA at?
Start around 205°C hotend and 60°C bed, then run a temperature tower across 190–220°C. Prusament PLA ~215°C and PETG ~240°C are dialled in for Prusa machines out of the box.
Is Prusament PLA good quality?
Tightest published tolerances; premium price but extremely consistent. As always, dry the spool if you see stringing or popping and calibrate flow before judging a brand.
Do I need to dry Prusament PLA?
Usually not, but if a spool has sat in humid air and strings badly, a few hours of drying helps.
Reviewed 2026-08-18. Independent guidance; not affiliated with Prusament.