Home › Bambu Lab A1 mini › Wood PLA
Wood PLA settings for the Bambu Lab A1 mini
Great match
These are tuned starting settings for printing Wood PLA on the Bambu Lab A1 mini. The Bambu Lab A1 mini has a direct-drive extruder and an all-metal hotend, so we set the hotend to 200°C and the bed to 55°C. Wood PLA contains real wood fibres, so a 0.5 mm or hardened nozzle reduces clogging.
200°C
Hotend
55°C
Bed
63 mm/s
Speed
100%
Part fan
Recommended Wood PLA profile
| Hotend temperature | 200°C (tower 190–215°C) |
| Bed temperature | 55°C |
| Print speed | 63 mm/s |
| Retraction | 0.8 mm (direct drive) |
| Part cooling fan | 100% |
| Bed adhesion | Easy; use a larger nozzle to avoid clogs. |
| Nozzle | Hardened steel (this filament is abrasive) |
| Difficulty | Beginner |
💡 Best uses for Wood PLA: decorative, rustic models.
FAQ
- What temperature should I print Wood PLA on the Bambu Lab A1 mini?
- Start at 200°C for the hotend and 55°C for the bed, then run a temperature tower across 190–210°C to dial in your exact filament brand.
- What print speed works for Wood PLA on this printer?
- Around 63 mm/s is a safe starting point on the Bambu Lab A1 mini. This printer can go faster once the profile is tuned, but start conservative for clean walls.
- What retraction should I use?
- Use about 0.8 mm of retraction (direct drive needs very little). If you see stringing with Wood PLA, raise retraction speed before distance and dry the filament.
- Do I need an enclosure for Wood PLA on the Bambu Lab A1 mini?
- No, Wood PLA prints fine in the open on the Bambu Lab A1 mini.