Home › Creality Ender 3 V2 › Wood PLA
Wood PLA settings for the Creality Ender 3 V2
Great match
These are tuned starting settings for printing Wood PLA on the Creality Ender 3 V2. The Creality Ender 3 V2 has a Bowden extruder with a PTFE-lined hotend, so we set the hotend to 200°C and the bed to 55°C. Wood PLA contains real wood fibres, so a 0.5 mm or hardened nozzle reduces clogging.
200°C
Hotend
55°C
Bed
45 mm/s
Speed
100%
Part fan
Recommended Wood PLA profile
| Hotend temperature | 200°C (tower 190–215°C) |
| Bed temperature | 55°C |
| Print speed | 45 mm/s |
| Retraction | 5 mm (Bowden) |
| Part cooling fan | 100% |
| Bed adhesion | Easy; use a larger nozzle to avoid clogs. |
| Nozzle | Hardened steel (this filament is abrasive) |
| Difficulty | Beginner |
💡 Best uses for Wood PLA: decorative, rustic models.
FAQ
- What temperature should I print Wood PLA on the Creality Ender 3 V2?
- Start at 200°C for the hotend and 55°C for the bed, then run a temperature tower across 190–210°C to dial in your exact filament brand.
- What print speed works for Wood PLA on this printer?
- Around 45 mm/s is a safe starting point on the Creality Ender 3 V2.
- What retraction should I use?
- Use about 5 mm of retraction (Bowden setups need more). If you see stringing with Wood PLA, raise retraction speed before distance and dry the filament.
- Do I need an enclosure for Wood PLA on the Creality Ender 3 V2?
- No, Wood PLA prints fine in the open on the Creality Ender 3 V2.