HIPS print settings
HIPS is a break-away or limonene-dissolvable support best paired with ABS in an enclosure. A good universal starting point is 235°C hotend, 100°C bed and 45 mm/s, but the exact numbers depend on your printer — pick yours below.
225–245°C
Hotend range
100°C
Bed
Advanced
Difficulty
HIPS settings by printer
| Printer | Hotend | Bed | Speed | Retr. |
|---|---|---|---|---|
| Creality Ender 3 V3 SE | 235°C | 100°C | 45 mm/s | 1 mm |
| Creality Ender 3 V2 | 235°C | 100°C | 45 mm/s | 6 mm |
| Creality Ender 3 S1 Pro | 235°C | 100°C | 45 mm/s | 1 mm |
| Bambu Lab A1 | 235°C | 100°C | 63 mm/s | 1 mm |
| Bambu Lab A1 mini | 235°C | 80°C | 63 mm/s | 1 mm |
| Bambu Lab P1P | 235°C | 100°C | 63 mm/s | 1 mm |
| Bambu Lab P1S | 235°C | 100°C | 63 mm/s | 1 mm |
| Bambu Lab X1 Carbon | 235°C | 100°C | 63 mm/s | 1 mm |
| Prusa MK4 | 235°C | 100°C | 63 mm/s | 1 mm |
| Prusa MINI+ | 235°C | 100°C | 45 mm/s | 6 mm |
| Anycubic Kobra 2 | 235°C | 100°C | 63 mm/s | 1 mm |
| Sovol SV06 | 235°C | 100°C | 45 mm/s | 1 mm |
| Creality K1 | 235°C | 100°C | 63 mm/s | 1 mm |
| Creality K1 Max | 235°C | 100°C | 63 mm/s | 1 mm |
| Elegoo Neptune 4 | 235°C | 100°C | 63 mm/s | 1 mm |
| Voron 2.4 | 235°C | 100°C | 63 mm/s | 1 mm |