The Qidi Q1 Pro (Qidi) has a direct-drive extruder, an all-metal hotend and an enclosed chamber, with a 350°C max hotend and 120°C max bed (245 × 245 × 245 mm). Of 14 common filaments, 14 are a great match on this hardware out of the box.
What filaments does the Qidi Q1 Pro support? The Qidi Q1 Pro supports 14 filaments out of the box. Its all-metal hotend, direct-drive extruder and 120°C bed decide what it can run.
350°
Max hotend
120°
Max bed
14/14
Great matches
Fast
Speed class
Qidi Q1 Pro filament compatibility
| ✅ Great match (print now) | PLA, PLA+, Silk PLA, Wood PLA, PETG, ABS, ASA, Nylon (PA), Polycarbonate, PLA-CF, PETG-CF, TPU, PVA, HIPS |
| ⚠️ Possible with tweaks | none |
| ❌ Not recommended as-is | none |
| Hotend | All-metal — high-temp capable |
| Extruder | Direct drive — good for flexibles |
| Chamber | Enclosed — ABS/ASA friendly |
Every filament on the Qidi Q1 Pro: settings table
| Filament | Hotend | Bed | Speed | Retract |
|---|---|---|---|---|
| ✅ PLA | 205°C | 60°C | 84 mm/s | 0.8 mm |
| ✅ PLA+ | 215°C | 60°C | 77 mm/s | 0.8 mm |
| ✅ Silk PLA | 215°C | 55°C | 56 mm/s | 0.9 mm |
| ✅ Wood PLA | 200°C | 55°C | 63 mm/s | 0.8 mm |
| ✅ PETG | 240°C | 80°C | 70 mm/s | 1.5 mm |
| ✅ ABS | 245°C | 100°C | 70 mm/s | 1 mm |
| ✅ ASA | 250°C | 100°C | 63 mm/s | 1 mm |
| ✅ Nylon (PA) | 260°C | 90°C | 56 mm/s | 1.5 mm |
| ✅ Polycarbonate | 275°C | 110°C | 49 mm/s | 1.2 mm |
| ✅ PLA-CF | 215°C | 60°C | 70 mm/s | 0.8 mm |
| ✅ PETG-CF | 250°C | 80°C | 63 mm/s | 1.5 mm |
| ✅ TPU | 225°C | 50°C | 25 mm/s | 1 mm |
| ✅ PVA | 200°C | 60°C | 42 mm/s | 1 mm |
| ✅ HIPS | 235°C | 100°C | 63 mm/s | 1 mm |
✅ great match · ⚠️ possible with tweaks · ❌ not recommended on this hardware.
FAQ
What filaments does the Qidi Q1 Pro support?
Can the Qidi Q1 Pro print PETG?
Yes. PETG prints well on the Qidi Q1 Pro at about 240°C hotend and 80°C bed. See the full Qidi Q1 Pro PETG profile.
Can the Qidi Q1 Pro print ABS or ASA?
Yes — the Qidi Q1 Pro is enclosed, which is exactly what ABS and ASA need to avoid warping.
Does the Qidi Q1 Pro need an all-metal hotend for high-temp filament?
No — the Qidi Q1 Pro already has an all-metal hotend, so it can safely reach the temperatures needed for ABS, ASA, PC and nylon (within its 350°C limit).
Reviewed 2026-08-18.