The Sovol SV06 (Sovol) has a direct-drive extruder, an all-metal hotend, with a 300°C max hotend and 100°C max bed (220 × 220 × 250 mm). Of 14 common filaments, 9 are a great match on this hardware out of the box.
What filaments does the Sovol SV06 support? The Sovol SV06 supports 9 filaments out of the box and can handle 5 more with tweaks (usually an enclosure or slower speed). Its all-metal hotend, direct-drive extruder and 100°C bed decide what it can run.
300°
Max hotend
100°
Max bed
9/14
Great matches
Std
Speed class
Sovol SV06 filament compatibility
| ✅ Great match (print now) | PLA, PLA+, Silk PLA, Wood PLA, PETG, PLA-CF, PETG-CF, TPU, PVA |
| ⚠️ Possible with tweaks | ABS, ASA, Nylon (PA), Polycarbonate, HIPS |
| ❌ Not recommended as-is | none |
| Hotend | All-metal — high-temp capable |
| Extruder | Direct drive — good for flexibles |
| Chamber | Open frame — warp-prone materials need help |
Every filament on the Sovol SV06: settings table
| Filament | Hotend | Bed | Speed | Retract |
|---|---|---|---|---|
| ✅ PLA | 205°C | 60°C | 60 mm/s | 0.8 mm |
| ✅ PLA+ | 215°C | 60°C | 55 mm/s | 0.8 mm |
| ✅ Silk PLA | 215°C | 55°C | 40 mm/s | 0.9 mm |
| ✅ Wood PLA | 200°C | 55°C | 45 mm/s | 0.8 mm |
| ✅ PETG | 240°C | 80°C | 50 mm/s | 1.5 mm |
| ⚠️ ABS | 245°C | 100°C | 50 mm/s | 1 mm |
| ⚠️ ASA | 250°C | 100°C | 45 mm/s | 1 mm |
| ⚠️ Nylon (PA) | 260°C | 90°C | 40 mm/s | 1.5 mm |
| ⚠️ Polycarbonate | 275°C | 100°C | 35 mm/s | 1.2 mm |
| ✅ PLA-CF | 215°C | 60°C | 50 mm/s | 0.8 mm |
| ✅ PETG-CF | 250°C | 80°C | 45 mm/s | 1.5 mm |
| ✅ TPU | 225°C | 50°C | 25 mm/s | 1 mm |
| ✅ PVA | 200°C | 60°C | 30 mm/s | 1 mm |
| ⚠️ HIPS | 235°C | 100°C | 45 mm/s | 1 mm |
✅ great match · ⚠️ possible with tweaks · ❌ not recommended on this hardware.
FAQ
What filaments does the Sovol SV06 support?
Can the Sovol SV06 print PETG?
Yes. PETG prints well on the Sovol SV06 at about 240°C hotend and 80°C bed. See the full Sovol SV06 PETG profile.
Can the Sovol SV06 print ABS or ASA?
The Sovol SV06 is open-frame, so ABS and ASA are possible but will warp on larger parts without an enclosure or draft shield. The hotend can reach the temperatures needed.
Does the Sovol SV06 need an all-metal hotend for high-temp filament?
No — the Sovol SV06 already has an all-metal hotend, so it can safely reach the temperatures needed for ABS, ASA, PC and nylon (within its 300°C limit).
Reviewed 2026-08-18.